Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Driveway & Pavers Across Burbank
Burbank homeowners call us for one reason: a driveway is a structural decision, not a surface finish, and it has to survive slope, sun, and the way this city handles water. We’ve walked enough properties on the hillside streets above Sunset Canyon and through Magnolia Park to know that what happens under the pavers matters as much as what’s on top. Whether you’re replacing a cracked ranch-era slab in Rancho or laying pavers on a sloping Verdugo foothills lot, our driveway & pavers team scopes the ground first, then quotes. Call (844) 320-6596. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Burbank Homeowners Call Construction Palmdale for Driveway & Pavers
Burbank is a company town with two very different construction stories running on the same blocks. Around the Empire Center and the airport corridor, soundstage and studio-support buildouts demand heavy loads, tight tolerances, and power infrastructure that doesn’t fail. Ten blocks away, you’re looking at a 1920s Spanish Colonial bungalow with knob-and-tube wiring and a driveway apron that’s been patched four times. Our technicians have up to 10 years of experience working across both environments, and that matters when a driveway has to meet a commercial-grade access standard on one street and respect a historic lot line on the next.
We treat the estimate as the start of a conversation, not a sales pitch. You’ll see line items: what’s being removed, how the base gets rebuilt, where drainage goes, and what permits apply. That transparency is why Burbank clients come back for the next phase of a project – a paver walkway now, a patio or a detached structure later.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Driveway & Pavers Services in Burbank
Paver Driveways
Paver driveways are the most requested work we do in Burbank, and for good reason. A properly set paver drive handles thermal cycling better than poured concrete because the joints flex. On a hillside lot, that flexibility is the difference between a surface that survives a Santa Ana season and one that ruts and heaves. We work with Techo-Bloc and Cambridge Pavers, which means you’re choosing a specific product line and finish, not accepting whatever happens to be on hand.

Stamped Concrete Driveway
Stamped concrete gives you the look of stone or brick at a lower installed cost, but it has to be poured right. Burbank’s west-facing aprons take intense summer sun, and a slab that was mixed too wet or lacked control joints will spall and crack within a few years. We specify the mix, the joint layout, and the curing approach for the exposure your driveway actually faces. It’s not a cosmetic decision – it’s a structural one.

Concrete Driveways & Concrete Work
Standard concrete is still the workhorse for Burbank’s ranch tract homes in the hills and on the east side. The typical failure mode we see is an old 1950s or 1960s slab that was overlaid instead of removed, which means the new surface inherits the old base’s problems. When we replace concrete, we start by assessing what’s under it.

Driveway Repair & Replacement
Not every driveway needs a full tear-out. Sometimes a section repair and a proper regrade solves the problem. But on sloping lots where water has been sheeting toward the garage for years, a patch just delays the failure. We’ll tell you honestly which one you’re looking at before you commit. Where the lot sits in a hillside grading zone, we scope permit-driven inspection sign-off into the quote from the start.
Trusted Brands We Service in Burbank
We source hardscape materials from manufacturers with deep design catalogs and real product guarantees – Techo-Bloc, Cambridge Pavers, Oldcastle, and Quikrete for concrete and base work. What that means for a Burbank project is you can compare a structural slab system against a permeable paver system against a stamped finish across budget tiers without switching contractors. We don’t stock these materials locally; we specify them, source them, and install them to manufacturer spec so the warranty stays with you. Turnaround starts with a scoped estimate, not a guess.
Common Driveway & Pavers Problems We See in Burbank Homes
- Base failure on sloped hillside lots. Old retaining walls that were built in the 1950s and never updated can redirect runoff straight across a drive. When that happens, the pavers fail from underneath, not from the surface.
- Spalling and cracking on west-facing concrete aprons. Intense summer sun on exposed slabs causes thermal cycling that breaks down a poor mix. The surface pops, then water gets in, then the crack widens. It’s a cascade.
- Paver settlement over old ranch-era slabs. When pavers are laid over a failed 1950s or 1960s concrete pad without removal, the base underneath is already compromised. The result is rutting within a season or two.
- Runoff pooling at the garage threshold. A driveway poured without positive drainage away from the structure will push water to the worst possible place during a post-storm wind event. Regrading the subgrade is the fix, not a surface coating.
See the difference
Before
After
Before
After
Before
AfterPricing for Driveway & Pavers in Burbank, CA
Typical estimated costs for driveway work in Burbank run from about $250 for sealing up to $18,000 for a full paver installation on a complex lot. What moves the number is almost always what’s underground: slope, drainage, whether the base is sound, and whether the lot is in a hillside grading zone that requires county sign-off instead of city. A flat Magnolia Park replacement and a Verdugo foothills rebuild are not the same job, and we don’t quote them as if they were. Every price is an estimate; the written line-item estimate sets the final cost. Estimates are free.
| Service | Typical Estimated Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Asphalt Driveway Paving | $3,500 – $9,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Stamped Concrete Driveway | $4,500 – $12,000 |
| Driveway Sealing | $250 – $700 |
| Paver Patio Installation | $3,500 – $11,000 |
We Also Serve Cities Near Burbank
We work throughout the surrounding area, including Glendale, La Crescenta-Montrose, La Cañada Flintridge, and Pasadena. The hillside grading and drainage conditions we handle in Burbank’s foothills carry over to neighboring properties on similar terrain, so the scoping approach doesn’t change much when you cross a city line. Same free estimate, same written line items.
Serving Burbank, CA – Our Local Coverage Area
We serve Burbank and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Driveway & Pavers in Burbank
It can, depending on where the property sits. Lots in hillside grading zones often fall under county jurisdiction rather than city permitting, and the inspection requirements differ. We check the jurisdiction and the grading requirements before we quote, so the permit path is built into the estimate rather than discovered mid-job. Call (844) 320-6596 for a free scoping estimate.
Wind matters less at the surface and more in how the surrounding lot drains. Santa Ana events drive debris and dry conditions, and when they follow a storm, water that pooled on the lot gets pushed toward the structure before it can drain. A stamped driveway poured without proper pitch away from the garage will channel that water to the worst spot. We regrade the subgrade with drainage in mind before any stamp work begins. Call for an exact quote – estimates are free.
Yes, but only if the base and grade are corrected, not just the surface. A paver system that keeps the existing slope will move water exactly where the old slab did. The fix is cutting out the failed section, regrading to a slight pitch away from the structure, and tying the apron into the walkway. A surface overlay won’t solve it. Call (844) 320-6596 to schedule a free estimate.
The material system and the base work. A basic replacement typically runs $5,000 – $14,000 and a full paver build runs $7,000 – $18,000, but the gap widens on sloped lots where retaining wall conditions, drainage correction, and hillside grading permits add scope. A full build also includes engineered base compaction, edge restraint, and apron transitions that a straight replacement may not require. The written estimate sets the final price. Call for an exact number.
Often yes, and the answer depends on jurisdiction and lot position. Hillside grading zones, expanded pads, and any work that changes drainage patterns usually require permits and inspection sign-off. Most flat-lot replacements in established neighborhoods are simpler, but we confirm before quoting rather than assume. Call (844) 320-6596 – estimates are free and we’ll tell you exactly what your lot requires.
Ready to Price Your Burbank Driveway Project
A driveway sits at the intersection of slope, drainage, and material choice, and in a city that mixes 1920s bungalows with media-industry buildouts, those variables change block by block. We’ll show you the options across paver, stamped, and standard concrete systems, explain what’s driving your cost, and put every line in writing before any work starts. Call (844) 320-6596 for your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Palmdale.